Metal Rebar Bender

Pipe Bender, 5/8" Heavy Duty Pipe Bender, Pipe Bending Roller 180°

Helpful Assistant : It can easily bend tubes with a diameter of 5/8 inch from 0 to 180°. What's more, its compact design allows for bending in tight spaces.

Simple Operation : You only need to simply place the tube in the tube groove and pull the handle to complete the bending. It is easy to operate even for novices, and it does not take too much time.

Use with Confidence : The bending form of the roller die, and the smooth tube grooves and inner grooves of the sliding bar enable smooth tube bending without scratching or distorting the tube, so you can use it with confidence.

564.00SEK

Electric Tapping Kit - 1800W - 50Hz - 2800RPM - Portable Pipe Cutter with 1/2-2"

High-quality Material : The high-quality aluminum head and carbon steel teeth make it have good wear resistance, high-temperature resistance, and long service life.

Powerful and Efficient : It is equipped with a 2300W high-performance all-copper motor with a speed of 26r/min, which provides a stable and powerful power output to ensure fast and precise completion of the threading operation under various working conditions and significantly improves work efficiency.

Great Adaptability : Our product includes six kinds of standard dies, which can adapt to threading of various pipe diameters, greatly enhancing the versatility of the equipment.

2,639.88SEK

Pipe bender, 5/8 inch pipe bending capacity, Bending angle: 0~180, for aluminum and stainless steel pipe

Excellent Bending Ability : Its unique steering mechanism has excellent bending performance, allowing you to easily bend 5/8in diameter pipes from 0 degree to 180 degree without crossing your hands.

Good Material : The tube bender is made of high quality alloy and the handle is made of 45# steel, with strong hardness and good corrosion resistance, so it is not easily deformed and can be used for a long time.

Non-destructive tube bending : the bending shape of the roller die, and the finely polished tube grooves and inner sliding bar grooves allow smooth tube bending without scratching or distorting the tube, so it can be used with confidence.

780.00SEK

7 Die Tube Bender, 1-3" Manual Bender, Extension Handle Manual Bender

【Large Capacity】The telescopic handle can bend up to 5/8" thick round or square bar with a maximum w..

1,307.88SEK

CT-999 Manual Pipe Bending Tool Kit with 7 Cutting Dies for 6-22mm Copper Tubes, Bending Radius up to 90°

Durable and Long-Lasting: High-quality nylon and steel make the product heat-resistant, pressure-res..

1,199.88SEK

Manual tube bender - Diameter: 10-25 mm

✅Premium quality steel, durable, will not rust. ✅ Easy to use, high efficiency. The folding effect i..

1,679.88SEK

CT-999F Manual Bending Machine with 7 Bending Parts for Red Copper Tubes

About this article Sturdy and Durable: Made of high-quality aluminum alloy and steel, it is very ..

1,319.88SEK

Professional hydraulic steel cutter HY-22 - 13 tones - 4-22 mm

Capacity: 13 tonnes. Minimum frame diameter: 4 mm. Max diameter of rebar: 22 mm. Robust, lightwei..

1,091.88SEK

CNCEST-8T 4-16mm Mild Steel Hydraulic Bolt Cutter with Box

This hydraulic bolt cutter is only suitable for rebar! It is not suitable for cutting hardened mater..

695.88SEK

UB-100A Manual Bender Metal Bender For Ribbon Steel Strip Flat Steel Round Steel And Angle Steel Manual Bender Max 120°

Different Shape of Materials : The product is able to bend different metal materials such as steel, wrought iron, brass, copper, aluminum, etc. And it can bend different shape of material, such as flat stock, round stock, square stock.

Energy-saving Structure : The metal bender adopts a long handle with ergonomic design for effortless operation. At the same time, this iron bender machine has a wide support surface. It can be installed on a bracket or simply on the ground.

Easy to Install : With its simple structure, and we provide a fully equipped installation kit , so you can install it easily.

2,640.00SEK

3-Piece Sheet Metal Bending Pliers, Tool Set for Bending and Folding Metal, Metal Bender

Build to Last : This product is made of premium carbon steel through integrated molding, high-temperature quenching, and electrophoretic blackening, which is corrosion-resistant, rust-proof, scratch-resistant, not easily broken or aged, and has a long service life.

3 Types of Pliers : This product includes three types of pliers: 45 °, 90 °, and straight bending pliers, which meet your different bending needs.

Ergonomic Handle : Each product is equipped with a PVC-wrapped handle that conforms to ergonomic design, providing a comfortable grip and preventing fatigue even after prolonged use.

652.80SEK

Bending machine 125 cm 220 V in plastic and PVC

Portable - Lightweight and convenient. Space-saving hot bending of plastic plates made of different ..

2,052.00SEK

Small Manual Roll Bending Machine, Metal Roller Bending Machine, Metalworking Machine for Bending

Sturdy and Stable : Made of high-strength hardened steel, the structure is impact-resistant and can withstand large bending force, ensuring stability and durability under long-time use.

Safe and Reliable : This product does not require an electric power drive, only relies on human operation, both safe and environmentally friendly, suitable for outdoor working environments.

Practical Tool : With this bending machine, you can freely bend steel plates, flats, and rounds, as well as process construction materials made of steel, copper, and aluminum.

3,599.88SEK

630mm Manual Metalworking Bender 1.2-1.5mm Sheet Metal Bending Folding Machine Cast Iron 90° Maximum Bending Angle

Save Time,Save Labor,Efficient : When you use this metal roller bender,you only need to move back and forth across the material to achieve the sheet metal brake bend angle you want.

Adjustable Bending Height : Due to the excellent performance of metal bender hand tool,metal roofing tools is not only suitable for roofing materials,but also for a wide range of other metal materials.Wide range of applications.

Widely Use : It's sturdy enough for professional production runs; It's a great choice for bending work and can be used in various factories, workshops, family workshops, or daily personal use.

1,884.00SEK

Metal Bending Machine 1.5mm Thickness 216mm Load Bearing Plate Bending Machine Pull Rod Bending Tool Stretcher Pneumatic Planishing Hammer

Dual Quick Change Buttons : The machine comes with two hardened jaws, one for retracting and one for stretching which can be extended by a prepared wrench.

Wide Application and Professional Use : This metal straightening machine can do most of our automotive metal casting work widely used in automotive restoration, custom motorcycle work, metal roofing and other industries.

Protective Package : To prevent the product from being damaged and bumped during transportation, we packed it with bubble bags, sponges, and cartons to protect your products to the maximum extent possible.

3,084.00SEK

Metal Rebar Bender

Hot Selling