Charge and Discharge Function : EBC-A20 is a battery tester with charge and discharge function for testing the capacity of lithium/lead-acid battery (charge and discharge 20A, maximum power 5A, 85W).

Advanced Function : Supports separate charging and unloading as well as the charging cradle connected to the computer which can be charged and discharged repeatedly and provides advanced functionality via online software.

Maximum Discharge Power : The maximum discharge power is 85W, within 4.2V can be 20A, 8.4V can be 10A, the higher voltage is less than 10A.

Convenient to Operate : The small head can fit some narrow and troublesome places, making it especially suitable for T-shaped joints.

Excellent Crimping Performance : Its enlarged cylinder has good crimping performance, which can provide a maximum crimping force of 10T and can finish crimping the piping in seconds. Without the requirement for brazing, welding, or flaring, it will create a leak-free connection for the pipe.

Labor-saving Operation : Compared to traditional manual crimping tools, this pipe crimper uses a hydraulic cylinder that provides powerful hydraulic power, allowing for effortless operation. The lightweight design does not make your arms sore from long hours of work.

Build to Last : Made of nylon, rubber, and steel, this product is not easily worn or deformed, ensuring your long-term use.

Powerful Function : It can be used together with a vibrating rod to remove excess water and bubbles during the pouring of concrete, allowing the cement to solidify and level.

Long Endurance : The 21V 4.0Ah lithium battery enables the machine to operate continuously for 70-80 minutes after being fully charged, avoiding the inconvenience of frequent charging and making it suitable for outdoor use.

Strong and Durable : Cr45 and high-temperature quenching and blackening process make the product high strength, high hardness, and good wear resistance, which is suitable for long-term use.

Good Compatibility : This set of molds is suitable for most mechanical or hydraulic pipe press pliers, and you can choose without worrying about compatibility issues.

Work Assistant : You can crimp tubes with diameters of 15 mm, 18 mm, 22 mm, and 28 mm with this set of dies, which is both convenient and practical.

4 Load Modes : The four load modes including CC, CV, CW, and CR that can be operated synchronously online can meet your testing demands.

Different Test Functions : The functions of voltage far-end measuring, auto testing, 10KHz dynamic testing, battery capacity testing, battery internal resistance testing, and overcurrent protection point/ time testing can meet your testing demands.

Digital Control Mode : The digital control mode makes it have high precision and good stability to ensure accurate test results.

Simple Operation : The ergonomic body fits the palm of your hand and the non-slip design allows for a tighter grip and easier control. It adopts downward pressure activation, which makes the work convenient and safe.

Pneumatic Power : It does not need to consume electricity or fuel, but works through the compressed air(not included) to make the hammer body into repeated impact movement, which is more energy-saving and money-saving.

Convenient Design : The lightweight and round handle designs make it easier and more convenient to use or carry this product.

Build to Last : Made of nylon, rubber, and steel, this product is not easily worn or deformed, ensuring your long-term use.

Powerful Function : It can be used together with a vibrating rod to remove excess water and bubbles during the pouring of concrete, allowing the cement to solidify and level.

Long Endurance : The 21V 4.0Ah lithium battery enables the machine to operate continuously for 70-80 minutes after being fully charged, avoiding the inconvenience of frequent charging and making it suitable for outdoor use.

Made to Last : High-class PP and aluminum alloy make this product sturdy, scratch-resistant, impact-resistant, and not easy to corrode and deform, ensuring a long service life.

High Efficiency : The maximum speed of a 100W brushless motor can reach 13000rpm, enabling high-speed tufting and greatly improving the efficiency of modern production.

2-in-1 Design : This product integrates both cutting mode and loop mode. You only need to remove the scissor head to easily switch from cutting mode to loop mode, making it convenient for you to weave fluffy or compact carpets, fully meeting your usage needs.

High Power : The power of this demagnetizer is 100W, which makes the demagnetization faster, more effective, and more thorough.

High Durability : The surface of the machine is cast with aluminum, so it has good corrosion resistance and is more durable.

High Efficiency : With the inside copper coil and good heat dissipation, this machine can run more stable and not easy to heat up, so it can work in a more efficient way.