







Standing Pile Driver Post Driver 2 Stroke Gasoline Engine 52cc 1900W Portable Gasoline Auger Petrol Stake 55-70mm Sleeve Anti-slip Handle 3 Post Driving-head
- Brand: CNCEST
- Product Code: OT-MLLCR-1810
- Availability: In Stock

Specifications
Material | ABS, Iron, Aluminium, Alloy Steel | Process | Spray Moulding |
Color | Black, Red, Grey | Power Source | Gasoline Powered |
Gasoline Type | #92 | Engine Type | Two-stroke, Air Cooling, Single-cylinder |
Displacement | 52cc | Fuel Tank Capacity | 1L/0.26gal |
Impact Frequency | 800-2800BPM | Fuel Type | Mixed Oil (Gasoline |
Fuel Consumption Rate | ≤0.5L/0.1Gal/h | Impact Energy | 25-45J |
Starter System | Hand Pull Start | Noise | ≤103DBA |
Max. Power | 1900W | Max. Speed | 6500r/min |
Max. Torque | 3.5N.m | U-Handle Size | 37*24.5cm/14.56*9.64in |
Product Length | 77cm/30.31in | Gross Weight | 26kg/57.3lbs |
Net Weight | 24kg/52.9lbs | Package Size | 73.5*42.5*32.5cm/28.9*16.7*12.8in |
Post Driving Head Mount Size | 55mm/2.17in(Small), 70mm/2.76in(Medium) , 100mm/3.94in(Big) |
Product Tips


Notes
1.If this product does not hammer, please check if too much lubricating oil has been added. Clean the excess oil in the cylinder and add about 20 grams of high-temperature resistant lubricating oil again.
2.If the impact frequency is too high to hold by hand, it is recommended to slightly reduce the speed of the carburetor. Otherwise, please increase the impact frequency.
3.If the machine does not start easily, first check the ratio of oil: gasoline: oil = 25:1, be sure to use a good two-stroke oil.
4.Please read the instructions carefully before use and pay attention to the safety matters contained therein.
Loading...
Loading...
Loading...
Loading...