Notes

1.Please note that the size of one side of the projector cannot exceed 16.54 inches.
2.If the thickness of the projector is 3.94 inches, the minimum fully concealed thickness (installation thickness) is 14.57 inches, and for every additional 0.39 inches, the installation thickness increases by 0.39 inches accordingly.
3.The standard base plate size is 19.6*19.6 inches, and the opening size is 18.5*18.5 inches. Please confirm this data when placing an order for use.
4.Please note that this product does not include a projector.

How to Install

1. Determine the installation position of the projector hanger based on the screen size and projector focal length, and then open a ceiling hole (18.5*18.5 inches) (this size is for reference only, and can be adjusted if there are special requirements).
2. Confirm the installation holes based on the dimensions of the decorative base plate. Secure the hanger mounting plate using four M8 × 12 explosive screws.
3. Install the projector hanger into the mounting plate and tighten it with four M6 × 12 screws.
4. Electronic limit switch, memory positioning.
5. Install the decorative base plate and adjust the screws to make the decorative base plate parallel to the ceiling.
6. Install the universal joint and secure the projector.
7. Strictly follow the trace schematic diagram for wiring to prevent pinch-off.