







15HP Gasline Powered Engine Multi-Use Engine Motor 4-Stroke OHV Engine Low Fuel Consumption with Damper Handle for Water Pumps Vibrators
- Brand: CNCEST
- Product Code: YLLNJS-000100
- Availability: In Stock

Specifications
Color | Black | Type | OHV, Single Cylinder, 4-stroke |
Material | Aluminium, Iron, Plastic, Nylon | Process | Painting |
Power Source | Gasoline | Engine Cooling Type | Air Cooling |
Starter Mode | Hand Pull Start | Displacement | 420cc |
Horsepower | 15hp | Rated Power | 8800W |
Maximum Power | 9700W | Rotational Speed | 3000-3600rpm |
Engine Oil Capacity | 1.1L/0.24gal | Fuel Tank Capacity | 6.5L/1.72gal |
Fuel Consumption Rate | ≤374g/kw. h | Product Size(L*H) | 43.5*45cm/17.1*17.7in |
Package Size | 48*52*55cm/18.9*20.47*21.65in | GrossWeight | 27kg/59.52 lbs |
Net Weight | 25.65kg/56.55 lbs |
Product Tips


Notes
1.Please read the product label and manual carefully before use.
2.Please note that this product does not contain fuel.
3.Please change the engine oil and pump oil at first 10 hours, and change the engine oil and pump oil every 100 hours.
4.After a long time of stock, you need to change the new petrol for the carburetor and fuel tank.
5.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

How to Use
1.Check the oil level, to the line above H. Add about 0.16gal 4-stroke gasoline engine oil, series: 15W30 or 15W40 (Remark: If the engine oil is not enough, it will cause the engine not to start. If it starts, the engine will shake.)
2.Add petrol 92# or 95# (Remark: If the petrol is not enough, it will cause the engine not to start. When you put the fuel tank cap, you should fix the two ears in the cap well with the part concave in, then press the cap and turn the fuel tank cap.)
3.Turn the adjust arm to the left side (The new machine keeps the position, and don't move it). Turn the throttle to the left side. Turn the fuel control valve on the right side.
4.Turn the engine switch to the ON position.
5.Start the engine.
6.After the engine starts, turn the check valve to the right side.
Loading...
Loading...
Loading...
Loading...