







Electric Concrete Agitator 1300W Indoor Vibrator 2m Vibration Rod Length Concrete Vibrator Used In Repair Construction Concrete Column
- Brand: CNCEST
- Product Code: JZON24Y5EUWMT
- Availability: Out Of Stock

Handle: The nylon handle fits the ergonomic design, making you grip it more comfortably and reducing your hand fatigue.
Lock switch: The handle is equipped with a self-locking switch, which can work the machine for a long time and reduce hand fatigue.
Usage:The product can be widely used in repair, construction, concrete columns, grape racks, highways, fences, bridges, etc.
High-end Material: The shell of the vibrator is made of aluminum, equipped with alloy gear and an iron galvanized rod head, which is wear-resistant and corrosion-resistant, and is not easy to rust. Therefore, you can use it for a long time without frequent replacement.
---
Specification
Color: Slivery, Red
Surface Treatment: Plastic Spraying
Material of Shell: Aluminum
Material of Handle: Nylon
Material of Gear: Alloy
Material of Rod Head: Iron Galvanized
Plug Type: EU Standard
Voltage: 220v
Power: 1300W
Speed: 4000 rpm
Rod length: 6.6 Ft/ 2m
Head Diameter: 1.4inch
Amplitude: 1.1mm/0.04inch
Max. Swing: 0.55mm/0.02inch
Motor Size: 32.8 * 8.8 * 15cm/5 * 3.5 * 5.9inch
Vibrating Rod Length: 200cm/78.9inch
Rod Head Length: 45cm/17.7inch,
Rod Head Diameter: 3.5cm/2inch
Nut Height: 4cm/2inch
Vibration: 14400 VPM
Net Weight: 8kg/17.64lbs
Gross Weight: 8.2kg/18.08lbs
Package Size: 68*45*10cm/26.77*17.72*3.84inch
---
Package Included
1*Concrete Vibrator
1*Copper Shaft Rod
---
Notes
1.After the power is turned on, if the concrete vibrator does not produce vibration, you can generally knock the end of the concrete vibrating rod to the ground, and after the vibrator makes a smooth and powerful chirping sound, you can carry out the pounding operation.
2.When the concrete vibrator works, the concrete vibrator should be inserted into the concrete vertically or at an angle, after vibrating for a certain period of time, the concrete vibrator should be pumped up and down when vibrating.
3.The vibrating rod should not be bent more than 50mm/1,97inch.
---
How to Use
1.Take out the shaft and motor.
2.Insert the shaft of the motor into the connected shaft.
3.Tighten it according to the direction of the thread.
4.Knock the vibrating bar on the ground several times.
Loading...
Loading...
Loading...
Loading...