Notes 

1. Please check the style and size before purchasing.
2. Please read the instruction manual and label completely before installation and use, and pay particular attention to the safety instructions included.
3. Please note that the recommended maximum chloride concentration in fresh/clean water below 140°F in the exchanger is 300 mg/L and should be reduced as the water temperature increases. Exceeding the recommended chloride concentration or direct use of the chlorinator may result in stainless steel pitting. Titanium pool heat exchangers are recommended for use in environments with high chloride concentrations.
4. Please note that the heat exchanger should always be installed in reverse flow and should be installed downstream of the filter and pump equipment. It must be an auxiliary equipment for boiler water and take usual precautions to prevent air lock.
5. People must not be in the water while the heat exchanger is working.
6. Please do not put 2 heat exchangers into a swimming pool at the same time.
7. The product requires a heating circuit to work properly and a thermostat circuit to ensure a continuous thermostatic effect.
8. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.