• Accurate Dosing: With the product's flow meter with enlarged display and four-digit precision counting, you can easily track the amount of liquid.
• [High flow rate] The increased product inlet and outlet (0.74 inch diameter) and 330 watt motor ensure a flow rate of 10.56 gallons per minute, which greatly improves transmission efficiency and saves working time.
• Diaphragm pump: The product uses a fluoroelastomer diaphragm pump to separate the transmission medium and the transmission machine, so that the medium does not leak, which is very efficient and safe. And the diaphragm pump without shaft seal greatly extends its service life.
• [Suitable (for reference)] The product is equipped with a wall-mounted shelf for hanging, which is space-saving and practical. For all car parks, car garages, service stations, etc. With it you can easily fill any type of vehicle and machine.
• [Product parameters] Model: FL-550. Voltage: AC220V. Power: 330W. Flow: 40L/min/10.56GPM. AMPS: 2 A. Speed: 2800 rpm. Inlet and outlet diameter: 19 mm. Maximum liquid temperature: 60°C. Inlet hose length: 2 m. Hose length: 4 m.

Points forts :
Installation facile.
Excellent heat dissipation, long service life.
Diaphragm pump.
High flow, high efficiency.
Wall-mounted, space-saving.
Precise material.

Wall-mounted design: The product is equipped with a wall-mounted shelf to place it hanging, which is space-saving and practical.

Features :
Model: FL-550
Materials: 304 stainless steel, nylon, viton, plastic
Tension : CA 220-240 V.
Power: 330 W
Plug: EU standard
Flow: 40 L/min/10.56 GPM.
Amps : 2 A.
Certification : CE
Use: urea, water.
Pump design: diaphragm
Speed: 2800 rpm
Inlet and outlet diameter: 19 mm.
Switch Setting: Yes
Maximum liquid temperature: 60°C.
Inlet hose length: 2 m.
Hose length: 4 m.
Installation type: direct installation
Gross weight: 16 kg.
Net weight: 15.5 kg.
Package dimensions: 38 x 36 x 32 cm.

Content :
1 urea pump.
1 x 2 m inlet hose.
1 hose of 4 m.
1 English user manual.
All accessories needed for installation.


Remarks :
1. We recommend professional installation. Please do not hesitate to contact us if you have any questions.
2. During fixed installations, please note that when connecting the suction and pressure lines to the pump, care must be taken that the connections are not mechanically stressed, for example by using hose clamps with inserts rubber to secure the cables to the wall.
3. If there is a risk of frost, the pump must be emptied, rinsed with water and stored in a frost-free place.