Product description
Shipping & Return
Wholesale Inquiry
Input: Vacuum Pressure Sensor Transducer Sensor for Oil Fuel Air Water Stainless ,0-15 psi. Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 7.5 psi outputs 2.5V, 15 psi outputs 4.5V.
Burst (over or max pressure) pressure: minimum 100 psi.
Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
Correct Connector No cutting or splicing
Wires: 4
Length:800mm(31.50inch)
Voltage:12-14V
Current:0.4-3A
Power:5-36W
Connector gender : Male
Thread size: M18-1.5
US Seller-Fast Shipping
Package Included :
4pcs Oxygen Sensor
Items that have been installed, altered or contaminated are non-returnable.
1. Vacuum Pressure Sensor Transducer Sensor for Oil Fuel Air Water Stainless ,ONLY a defective sensor after tested by a voltmeter is applied to manufacturer warranty.
2. 20% restocking fee is required if buyer bought wrong items due to not paying attention to fitment information and ask for return.
The Price, Quality & Functionality of the O2 Sensor is fully covered under our warranty & return policy. However, refund for any labor cost, expense in a dealer shop or damage due to wrong installation is NOT covered.
Q: How do I know the O2 sensor is good or not?
A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.
Use a 10-megaohm digital voltmeter. Hook up the voltmeter's red probe to the sensor's signal wire and the black probe to engine ground. (Use back probe method, DO NOT pierce the wire.) For a good sensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or 3 minutes.
Please take a video clip of the voltmeter and contact us if our sensors are in the
following situation:
Goes above range between 0.1 and 0.9 volt
Remains below 0.5 volts
Stays fixed at a particular voltage
You're free to choose replacement or refund if our sensors fail to work, in this case.
Burst (over or max pressure) pressure: minimum 100 psi.
Thread: 1/8”-27 NPT. (see our fitting set for other thread size below).
Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
Correct Connector No cutting or splicing
Wires: 4
Length:800mm(31.50inch)
Voltage:12-14V
Current:0.4-3A
Power:5-36W
Connector gender : Male
Thread size: M18-1.5
US Seller-Fast Shipping
Package Included :
4pcs Oxygen Sensor
Items that have been installed, altered or contaminated are non-returnable.
1. Vacuum Pressure Sensor Transducer Sensor for Oil Fuel Air Water Stainless ,ONLY a defective sensor after tested by a voltmeter is applied to manufacturer warranty.
2. 20% restocking fee is required if buyer bought wrong items due to not paying attention to fitment information and ask for return.
The Price, Quality & Functionality of the O2 Sensor is fully covered under our warranty & return policy. However, refund for any labor cost, expense in a dealer shop or damage due to wrong installation is NOT covered.
Q: How do I know the O2 sensor is good or not?
A: The only way to know if the O2 sensor is functioning normally is to check its responsiveness to changes in the air/fuel mixture, by Voltage Measurement or Waveform Simulation.
Use a 10-megaohm digital voltmeter. Hook up the voltmeter's red probe to the sensor's signal wire and the black probe to engine ground. (Use back probe method, DO NOT pierce the wire.) For a good sensor, voltage should fluctuate constantly between 0.1 and 0.9 volts after starting the engine for 2 or 3 minutes.
Please take a video clip of the voltmeter and contact us if our sensors are in the
following situation:
Goes above range between 0.1 and 0.9 volt
Remains below 0.5 volts
Stays fixed at a particular voltage
You're free to choose replacement or refund if our sensors fail to work, in this case.
Shipping Policy
We offer free shipping on all orders with UPS Ground in the US mainland. Transit time with UPS ground shipping is anywhere from 3-4 business days depending on your location. If you have any questions, feel free to contact via email support@cncest.com or Tel: +86-18981865415.
We use the highest quality and fastest logistics companies such as UPS Logistics, USPS, and FedEx Logistics to assist transportation.
Note: We don't use the post office box.
Most products ship within 3 business days from the date of your order (unless indicated on the product page). We will send you tracking information as soon as it is available. If you do not receive tracking info within 5 business days of your order, feel free to follow up with us via email.
For more details, please check our Shipping Policy page.
The refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition. You may learn more details on our Refund Policy page.
We offer free shipping on all orders with UPS Ground in the US mainland. Transit time with UPS ground shipping is anywhere from 3-4 business days depending on your location. If you have any questions, feel free to contact via email support@cncest.com or Tel: +86-18981865415.
Note: We are unable to ship to Alaska, Hawaii, Puerto Rico, APO/FPO, or U.S. territory.
We use the highest quality and fastest logistics companies such as UPS Logistics, USPS, and FedEx Logistics to assist transportation.
Note: We don't use the post office box.
Shipping Times
Most products ship within 3 business days from the date of your order (unless indicated on the product page). We will send you tracking information as soon as it is available. If you do not receive tracking info within 5 business days of your order, feel free to follow up with us via email.
DELIVERY DAYS: 3-4 Business DAYS
Processing Time: 3 Business days
Our advantages: We have three local warehouses located in NJ, CA & GA. The goods will ship to you from the closest warehouse.
Our advantages: We have three local warehouses located in NJ, CA & GA. The goods will ship to you from the closest warehouse.
International Purchase
Import duties, taxes, and charges are not included in the item price or shipping charges. The buyer should be responsible for these charges.
For more details, please check our Shipping Policy page.
Return Policy
All our products could return for free within 60 days for some reason! Please check our Return Policy page for more details.
Refund Policy
Every product is backed by a 12-months warranty and a 60-day return policy from the date of purchase. Exceptional circumstances will be listed clearly in the listing. If you need to return a product and get a refund, please contact us for a free shipping label and ship it back.
The refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition. You may learn more details on our Refund Policy page.
Contact Us:
Address:
NO 3 TAI YAU STREET
San Po Kong, Kowloon, HK
Tel: +86-18981865415
Our telephone working hours: Monday to Friday, 8:00-17:00 (GMT- 08:00)
Email: support@cncest.com (Emails will be answered within 24 hours.
(Except weekends and public holidays)
Reviews
Customer Reviews
Based on 1 review
Write a review