✔️【Product parameters】 Large mixing capacity (H, O): 20L; motor input power: 72W; motor output power: 60W; mixer power: 80W; voltage: 100-240V; rotation speed: 100-2000rpm; speed display: LCD ; Variable speed: 20rpm.
✔️【Adjustable speed】 High and low speed, accurate and controllable, CD displays the set value and actual value of the speed, and can monitor the speed and time in real time. Wide speed range 100-2000rpm, constant speed, high and low speed can be accurately controlled.
✔️【Slip protection】 The condensation tongs are wrapped with rubber, which will increase friction and effectively clamp the container. The torque can be adjusted automatically according to the change of the sample viscosity, and the thickened base surface has an anti-skid pad, which not only keeps the machine stable during operation, but also makes it resistant to acid and alkali.
✔️【DC permanent magnet motor】 The stirring rod is operated by a DC permanent magnet motor, which has low noise during operation and can work continuously for a long time. Usually maintenance-free, saving you a lot of time and machine maintenance costs.
✔️【Scope of use】It is a good tool for petroleum, chemical industry, metallurgy, textile, food, analysis room, education and research, and an ideal partner for work, please rest assured to buy.
The condensation tongs are wrapped with rubber, which will increase friction and effectively clamp the container. The torque can be adjusted automatically according to the change of the sample viscosity, and the thickened base surface has an anti-skid pad, which not only keeps the machine stable during operation, but also makes it resistant to acid and alkali.
High and low speed, accurate and controllable, CD displays the set value and actual value of the speed, and can monitor the speed and time in real time. Wide speed range 100-2000rpm, constant speed, high and low speed can be accurately controlled.
Large mixing amount (H, O): 20L
Motor input power: 72W
Motor output power: 60W
Mixer power: 80W
Voltage: 100-240V
Speed: 100-2000rpm
Speed display: LCD
Variable speed: 20rpm
Torque: 40 (N/CM)
Overload protection: automatic shutdown
Maximum viscosity [MPAS]: 10000
Drilling chuck clamping diameter range [VAC]: 0.5-10
DIN EN60589 protection method: IP42
Allowable ambient temperature [°C]: 5-40
Allowable ambient humidity [%]: 80
Steps:
Press and hold the right button to start, press the setting button to select the setting
① Press the setting button once, the mode flashes, press the upper and lower two buttons in the middle to select the mode, there are three modes corresponding to different speed and time respectively.
② Select the mode, press the setting button again, the RPM flashes, and use the up and down keys to set the desired speed per minute.
③ After setting the speed, press the setting key, Min flashes, use the up and down keys to set the required timing time, the speed reaches the set speed after starting, and the timing starts.
④ Set the above parameters in a specific mode, long press the set button, the screen flashes, indicating that the parameter has been saved in this mode, next time only need to select the mode corresponding to the set speed and time, press the right button to start and pause, long The key is turned off.
The package includes:
1 *Host
1 *Stirring rod
1 * Pillar
1 * thick bottom
We offer free shipping on all orders with UPS Ground in the US mainland. Transit time with UPS ground shipping is anywhere from 3-4 business days depending on your location. If you have any questions, feel free to contact via email support@cncest.com or Tel: +86-18981865415.
We use the highest quality and fastest logistics companies such as UPS Logistics, USPS, and FedEx Logistics to assist transportation.
Note: We don't use the post office box.
Most products ship within 3 business days from the date of your order (unless indicated on the product page). We will send you tracking information as soon as it is available. If you do not receive tracking info within 5 business days of your order, feel free to follow up with us via email.
Our advantages: We have three local warehouses located in NJ, CA & GA. The goods will ship to you from the closest warehouse.
International Purchase
Import duties, taxes, and charges are not included in the item price or shipping charges. The buyer should be responsible for these charges.
For more details, please check our Shipping Policy page.
Return Policy
All our products could return for free within 60 days for some reason! Please check our Return Policy page for more details.
Refund Policy
Every product is backed by a 12-months warranty and a 60-day return policy from the date of purchase. Exceptional circumstances will be listed clearly in the listing. If you need to return a product and get a refund, please contact us for a free shipping label and ship it back.
The refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition. You may learn more details on our Refund Policy page.
Contact Us:
Address:
NO 3 TAI YAU STREET
San Po Kong, Kowloon, HK
Tel: +86-18981865415
Our telephone working hours: Monday to Friday, 8:00-17:00 (GMT- 08:00)
Email: support@cncest.com (Emails will be answered within 24 hours.
(Except weekends and public holidays)