CNCEST Fast Self Stretching Screen Frame Type Multi-Functional Self-tensioning Screen High Precise Mesh Stretching Equipment

• ★This stretcher can be used for aluminum alloy screen frame, wooden frame and iron frame. 
  
• ★The maximum size screen frame can be stretched is outer size 60cm , the maximum tension can be up to 18N. It is suitable for 90% screen plate tension. The quality of the stretched frame is similar to the traditional rubber tension stretcher.
  
• ★As for screen frame with thickness less than 30mm,place the screen frame with mesh side down into the stretcher. As for screen frame with thickness more than 30mm,place the screen frame with mesh side up into the stretcher.
  
• ★Coating glue on the screen frame for the first time to achieve the degree of non-stick hand, then put into the frame base.
  
• ★After the glue is dry and solid, cut the mesh from the outside of the frame, take down the frame.

Suitable for beginners

It's really fast and easy to set up and stretch a screen with this superb stretcher. Help beginner learn how to stretch screen quickly.

Easy to clean

The stretching frame is made of special aluminum alloy material. The base is made of thick steel plate with advanced electrostatic spraying. Spray coated machine rack with smooth surface. Main parts cleaning up is more conveniently.

Specifications:
Stretch Size : Below 60x60cm(24x24inch)
Net Weight: 7 kg /15 lbs
Packing Size: 75 x 13 x 13 cm/30 x 5 x 5 inches
Gross Weight: 7.7 kg /17 lbs
Packing Quantity:1
 Product Color: Blue
Packing Volume: 0.013 cubic metre(3.434gal)
Maximum Tension: 18N
Machine Material: Steel Plate
Metal Surface Treatment Materials: Electrostatic Spraying
Accessory Materials: Stainless Steel/Galvanizing/Nickel Plating

Installation:
1.Install  the stand screw on the base; Install the clamp part and handle on the stand screw; Connect the two bases with a connecting plate; The two connected bases are placed crosswise; (please note the direction of the concave buckle of the four connecting strips)
2.Install the stretching screen frame, first,  connect the four frame bars with corner parts and tighten.
3.Loosen the concave bars and push them inwards.
4.Open the buckle, put the mesh into one side, try to tighten the mesh, and put the mesh into the other side of the groove.
5.Use a hexagon socket wrench to tighten all around to achieve the required tension, wait for use.
6.Coating glue on the screen frame for the first time to achieve the degree of non-stick hand, then put into the frame base.
7.As for the screen frame with thickness less than 30mm, place the screen frame with mesh side down into the stretcher.
8.Press the screen frame with the clamp part, rotate the handle to increase the pressure, and the screen frame with mesh will close-fitting combination further increases tension.
9.The second time coating mesh glue (wooden screen frame can be fixed with a nail gun ).
10.After the glue is dry and solid, cut the mesh from the outside of the frame, take down the frame.

Package  Included:
1 x Manual Screen Frame Stretcher
4 x Screen Printing Table Top Knobs
4 x Tooth Screws
All Accessories Required for Assembly

Notes:
1. The real color of the item may be slightly different from the images shown on the website caused by many factors such as your monitor brightness and brightness of the light.
2. Please allow 1-3 cm error due to manual measurement. Please make sure you do not mind before you order.