- 【Specifications】Model: X001; Power: 900W; Sol speed: 3KG/HR; Solvent capacity: 3KG/HR; Maximum viscosity; 10000 CPS; Working temperature: 160-180°C; Temperature control range: 0-300°C; Adhesive Injecting Dispenser Equipment Hot Melt Glue Spray Injecting Machine 110V
- 【Shutdown Steps】1.Release the foot switch to cut off the main power;2.Disconnect the air pipe, or adjust the pressure regulating valve of the filter cup to 0
- 【Boot Steps】1.Connect the power and turn the power switch to ON; 2.Check if the temperature of the temperature controller is within the above range; 3.Check whether the pressure relief is turned in the direction of pressure holding; 4.Connect the origin, set the pressure value, and start the operation
- 【Application】Hot melt glue dispensers are widely used in: toys (bonding, fixing, wiring, insulation), sealing. Packaging; handbags skin bags; small appliances. Wires. Connectors. Connectors; audio. Photo frame: identification labels; Small paper products are bonded and fixed; small ornaments, crafts, hairpins, water polo, etc. Electronic products are fixed. Adhesive. Insulation; other manual or semi-automatic use of glue is required.
- 【Satisfaction Guarantee】If you are unable to obtain your item due to loss or other reasons. Don't worry, please contact us as soon as possible. We will help you until satisfaction.
 |
Made of high-quality steel, it is durable, strong and has a long service life |
 |
It is easy to install without the aid of other tools, and it is small and easy to carry |
Specifications:
Model: X001
Power: 900W
Sol speed: 3KG/HR
Solvent capacity: 3KG/HR
Maximum viscosity; 10000 CPS
Working temperature: 160-180°C
Temperature control range: 0-300°C
Safety Precaution:
Always wear safety gloves, goggles, and long-sleeved overalls to avoid burns from hot liquid hot melt adhesive
1. The gas circuit should avoid too much water vapor entering
2. The hot melt adhesive capacity must not exceed seven points of the capacity of the storage bucket.
3.The maximum total air pressure is set to 4KG
4. Before heating the melted glue, the pressure of the storage bucket must be released first.
Preparation for Operation:
1. Confirm the safety protection measures
2. Check if the machine is 110VAC and there is no fluctuation in the pressure
3. See if the temperature of the plastic bucket is set at about 170 degrees (different hot melt adhesives have different softening points. For specific setting values, refer to the data provided by the hot melt adhesive supplier)
4. Check whether the foot switch is connected and whether any conductive objects have touched the components in the electric control box.
5. Check if the air supply system is basically dry and the air pressure is stable
6. Power on and test the circuit of each part.
We offer free shipping on all orders with UPS Ground in the US mainland. Transit time with UPS ground shipping is anywhere from 3-4 business days depending on your location. If you have any questions, feel free to contact via email support@cncest.com or Tel: +86-18981865415.
We use the highest quality and fastest logistics companies such as UPS Logistics, USPS, and FedEx Logistics to assist transportation.
Note: We don't use the post office box.
Most products ship within 3 business days from the date of your order (unless indicated on the product page). We will send you tracking information as soon as it is available. If you do not receive tracking info within 5 business days of your order, feel free to follow up with us via email.
Our advantages: We have three local warehouses located in NJ, CA & GA. The goods will ship to you from the closest warehouse.
International Purchase
Import duties, taxes, and charges are not included in the item price or shipping charges. The buyer should be responsible for these charges.
For more details, please check our Shipping Policy page.
Return Policy
All our products could return for free within 60 days for some reason! Please check our Return Policy page for more details.
Refund Policy
Every product is backed by a 12-months warranty and a 60-day return policy from the date of purchase. Exceptional circumstances will be listed clearly in the listing. If you need to return a product and get a refund, please contact us for a free shipping label and ship it back.
The refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition. You may learn more details on our Refund Policy page.
Contact Us:
Address:
NO 3 TAI YAU STREET
San Po Kong, Kowloon, HK
Tel: +86-18981865415
Our telephone working hours: Monday to Friday, 8:00-17:00 (GMT- 08:00)
Email: support@cncest.com (Emails will be answered within 24 hours.
(Except weekends and public holidays)