Product description
Shipping & Return
Wholesale Inquiry
★Quick and convenient operation for direct display of accurate moisture and temperature data.It can test more than 20 kinds of grain.
★Test time: 10s;Repeat error: ≤2%;Test error: ≤0.5%;Moisture range: 3~35%;Working humidity: ≤80%;
★Based on the standard samples by means of 105°C over, the corrective value means the standard value minus the test result. For example, the Tested moisture is 13.6% and the actual moisture needed to display is 14%, so we should add 0.4, and the current reviser value is 0.4. Otherwise it will be the negative value.
★Spill the sample from the instrument, press the species key for long time till flash and then loose it. The red. lamp under the low left corner of the display will be bright, and the instrument will display the default revisory value "0.0". It means that the instrument is now in the revising status.
★Press the "+" key to add 0.4, then press the OK key to save. The revision is completed when the lamp flashes. Press the species key or switch off to exit.The complete procedure refers to following illustration.
Weight: 1kg.
Specifications.
Test time: 10s.
Repeat error: ≤2%.
Test error: ≤0.5%.
Sample weight: 150g.
Grain moisture meter.
Moisture range: 3~35%.
Working humidity: ≤80%.
Temperature compensation.
Working temperature: 0~40C.
Test more then 20 kinds of grain.
Power supply: 9V DC, 4pcs dry batteries.
Following way to set up the standard.
1) Prepare the standard sample: Prepare three kinds of standard samples with high, middle and low moisture by means of 105°C oven (if the actual Test range is less than 6%, it is enough to only use two standard samples with high and low moisture.). In order to make the standard setup representation and veracity, the moisture in the high. and low standard sample must be in the two ends of the actual moisture range. The suitable moisture difference among the standard samples is 3-6%. (for examples: the moisture of wheat is 18%, 14% and 10%).
2) Enter into the standard setup: Spill the sample from the instrument, press the "OK" key for long time and loose it when the display flashes. The red lamp under the low left corner of the display will be bright, and the species code is showed on the display. It indicates that the instrument is now in standard setup.
3) Select the species code: Press ""or ""key to select the species code.
4) Note the setup order: You should follow the following order to set standard: first is the low moisture, next is the high moisture and final is the middle moisture.
5) Set low moisture standard: take low moisture sample and fall them into the sensor. When the test result is displayed, change the Test result (display 11%) into the standard value (10%). Then press "OK" key and loose it till the digits flash. One standard setup is completed.
★Test time: 10s;Repeat error: ≤2%;Test error: ≤0.5%;Moisture range: 3~35%;Working humidity: ≤80%;
★Based on the standard samples by means of 105°C over, the corrective value means the standard value minus the test result. For example, the Tested moisture is 13.6% and the actual moisture needed to display is 14%, so we should add 0.4, and the current reviser value is 0.4. Otherwise it will be the negative value.
★Spill the sample from the instrument, press the species key for long time till flash and then loose it. The red. lamp under the low left corner of the display will be bright, and the instrument will display the default revisory value "0.0". It means that the instrument is now in the revising status.
★Press the "+" key to add 0.4, then press the OK key to save. The revision is completed when the lamp flashes. Press the species key or switch off to exit.The complete procedure refers to following illustration.
Weight: 1kg.
Specifications.
Test time: 10s.
Repeat error: ≤2%.
Test error: ≤0.5%.
Sample weight: 150g.
Grain moisture meter.
Moisture range: 3~35%.
Working humidity: ≤80%.
Temperature compensation.
Working temperature: 0~40C.
Test more then 20 kinds of grain.
Power supply: 9V DC, 4pcs dry batteries.
Following way to set up the standard.
1) Prepare the standard sample: Prepare three kinds of standard samples with high, middle and low moisture by means of 105°C oven (if the actual Test range is less than 6%, it is enough to only use two standard samples with high and low moisture.). In order to make the standard setup representation and veracity, the moisture in the high. and low standard sample must be in the two ends of the actual moisture range. The suitable moisture difference among the standard samples is 3-6%. (for examples: the moisture of wheat is 18%, 14% and 10%).
2) Enter into the standard setup: Spill the sample from the instrument, press the "OK" key for long time and loose it when the display flashes. The red lamp under the low left corner of the display will be bright, and the species code is showed on the display. It indicates that the instrument is now in standard setup.
3) Select the species code: Press ""or ""key to select the species code.
4) Note the setup order: You should follow the following order to set standard: first is the low moisture, next is the high moisture and final is the middle moisture.
5) Set low moisture standard: take low moisture sample and fall them into the sensor. When the test result is displayed, change the Test result (display 11%) into the standard value (10%). Then press "OK" key and loose it till the digits flash. One standard setup is completed.
Shipping Policy
We offer free shipping on all orders with UPS Ground in the US mainland. Transit time with UPS ground shipping is anywhere from 3-4 business days depending on your location. If you have any questions, feel free to contact via email support@cncest.com or Tel: +86-18981865415.
We use the highest quality and fastest logistics companies such as UPS Logistics, USPS, and FedEx Logistics to assist transportation.
Note: We don't use the post office box.
Most products ship within 3 business days from the date of your order (unless indicated on the product page). We will send you tracking information as soon as it is available. If you do not receive tracking info within 5 business days of your order, feel free to follow up with us via email.
For more details, please check our Shipping Policy page.
The refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition. You may learn more details on our Refund Policy page.
We offer free shipping on all orders with UPS Ground in the US mainland. Transit time with UPS ground shipping is anywhere from 3-4 business days depending on your location. If you have any questions, feel free to contact via email support@cncest.com or Tel: +86-18981865415.
Note: We are unable to ship to Alaska, Hawaii, Puerto Rico, APO/FPO, or U.S. territory.
We use the highest quality and fastest logistics companies such as UPS Logistics, USPS, and FedEx Logistics to assist transportation.
Note: We don't use the post office box.
Shipping Times
Most products ship within 3 business days from the date of your order (unless indicated on the product page). We will send you tracking information as soon as it is available. If you do not receive tracking info within 5 business days of your order, feel free to follow up with us via email.
DELIVERY DAYS: 3-4 Business DAYS
Processing Time: 3 Business days
Our advantages: We have three local warehouses located in NJ, CA & GA. The goods will ship to you from the closest warehouse.
Our advantages: We have three local warehouses located in NJ, CA & GA. The goods will ship to you from the closest warehouse.
International Purchase
Import duties, taxes, and charges are not included in the item price or shipping charges. The buyer should be responsible for these charges.
For more details, please check our Shipping Policy page.
Return Policy
All our products could return for free within 60 days for some reason! Please check our Return Policy page for more details.
Refund Policy
Every product is backed by a 12-months warranty and a 60-day return policy from the date of purchase. Exceptional circumstances will be listed clearly in the listing. If you need to return a product and get a refund, please contact us for a free shipping label and ship it back.
The refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition. You may learn more details on our Refund Policy page.
Contact Us:
Address:
NO 3 TAI YAU STREET
San Po Kong, Kowloon, HK
Tel: +86-18981865415
Our telephone working hours: Monday to Friday, 8:00-17:00 (GMT- 08:00)
Email: support@cncest.com (Emails will be answered within 24 hours.
(Except weekends and public holidays)