CNCEST 52CC Gas Powered Post Hole Digger Auger Borer Fence Drill with 4"/6"/8" Bits

• ★Ergonomically designed, it is accurate, easy to use and economical.
• ★Equipped with a 52cc gasoline engine, the auger can be handled by one or two people easily for a wide variety of tasks.
• ★Supplied with bits of 4", 6" & 8", the auger can drill holes of various diameters.
• ★The Earth Auger has a straight through gearbox, unlike models with a side mounted engine, the straight through design is much more robust and less likely to shear gears.
• ★The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts, poles, trees, shrubs etc.

The attached manual is a general version of a variety of products, so the accessories and parameters introduced will be slightly different. The product you received is complete and correct. If you have any questions about installation/operation, please contact the seller for assistance.

	High quality starter Quickly pull the starter when starting, do not pause in the middle of pulling, Pull out forcefully and slowly recover.
	Fuel tank plus mixed oil Gasoline two-stroke engine oil = 25:1
	Throttle switch The latest hand-held throttle total stroke makes operation more convenient and comfortable.
	Throttle acceleration switch Turn the throttle switch to ON before starting the machine When the position is turned off, the throttle is adjusted to the lowest throttle. The machine can be turned off when the switch is turned OFF.
	Oil bubble Press the oil bulb a few times before starting, and see that there is oil in and out of the tubing, saying that the oil has been supplied.
	Damper switch Close the damper when the cold machine starts, and open the damper during normal operation.

Technical Details:
Engine: Single Cylinder, 2-stroke, air-cooled.
Cylinder capacity : 52cc.
Fuel mix: 25/1.
Bits : 4", 6" and 8".
Bit length: 31".
Safety: Bit Lock.
Power: 1.9W/7500rpm
Carburetor with pump.
Easy starting system (cord starter). Centrifugal clutch.
Change bits quickly and easily.
Weight : 10.35 Kg. (without bit).
Rotational Speed：8500RPM
horsepower: 2.4 ps

Accessories:
3 bits: 4", 6" and 8".
Extension Bar: 12".
Fuel Mixing Bottle.
Toolkit for assembly.

Note:
Please keep the choke to on position when the machine is in use!
With this tool, you will be able to perform professional quality work.

The attached manual is a general version of a variety of products, so the accessories and parameters introduced will be slightly different. The product you received is complete and correct. If you have any questions about installation/operation, please contact the seller for assistance.