Notes

1.Please note that it needs to be switched off and charged for 5-8 hours after receipt.
2.Please note that you cannot select two metals at the same time as this will damage the instrument.
3.Since the handle of the instrument can be turned freely, and the wind can interfere with the metal detector, using this instrument in windy conditions may be subject to certain interference. The use of this instrument is closely related to the operator's control over scanning.
4.Please note that due to the presence of geomagnetic storms and solar auroras, the instrument must be calibrated for some time before it can function properly. During this period, the receiver will continue to receive signals, but the instrument will not make any response. This situation is uncontrollable and requires time to adapt.
5.Please note that this instrument is suitable for field operations, as it is susceptible to interference, especially radio waves when detecting in urban areas. Therefore, mobile phones should be turned off before using the instrument.
6.Please note that if the metal is too small, the machine may not be able to detect it through scanning.
7.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.