How to use it

Starting the machine: 1. Link the machine according to the manual, plug in the power supply and start the machine 2. Determine the hardness and softness of the wall putty, decide what kind of sandpaper use and choose the speed of the machine. Sanding operation: 1. Sanding personnel should first place the sanding disc on the wall, and then work on the machine. 2. When sanding the top of the wall, operate the machine in a W-shaped motion up and down. When using the W-shaped working method, pay attention to maintaining a uniform speed when moving up and down, and do not pause when turning, which would cause sanding marks on the wall. 3. When sanding the bottom of the wall, operate the machine to move up and down laterally. 4. Sand the top of the wall choosing the shoulder type. In the process of sanding the upper part, pay attention to maintaining the balance of the sanding disc when moving under the feet. 5. Sanding should be done in order to avoid loss. 6. When sanding, you should always pay attention to the working condition of the machine and find problems to solve in time. 7. Clean the vacuum cleaner once every time you sand 323ft² and dump out the accumulated dust. 8. Master sanding skills, find very uneven walls, sand repeatedly several times, special vulgar places need manual processing, to prevent machine sanding from appearing through the background phenomenon. 9. Sanding Yang corner grinding disc can not exceed the wall 3-5CM, to avoid exceeding too much to lead to tilting of the grinding disc, breaking the corner. 10. While sanding, please do not force the grinding disc against the wall for a long time working. 11. Clean the sander and organize other support facilities at the end of the day.

Grades

1. When sanding high walls, if an accidental fall causes the dust tube to disconnect from the black connecting hook, simply insert the black connecting hook into the telescopic tube first, and then tighten the dust tube clockwise. clockwise toward the inside of the connecting hook until it cannot be tightened. 2. Please note that this product does not support the additional installation of extension handles or folding handles. 3. Please allow slight color difference caused by shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.