







Manual Hydraulic Hand Pump Hydraulic Hand Pump Manual Hydraulic Pump with Pressure Gauge Long Non-slip Handle High-pressure Oil Pipe Large Oil Storage
- Brand: CNCEST
- Product Code: GYKNJH-000100
- Availability: In Stock

Specifications
Color | Yellow | Model | CP-700 |
Material | Cast Iron | Process | Machining |
Assembly Required | Yes | Thread Connection | ZG3/8'' |
Maximum Output Pressure | 700bar/10152.64psi | High-Pressure Output Oil | 2.3cc/0.14cu in |
Low-Pressure Output Oil | 13cc/0.79cu in | Oil Storage | 700cc/42.72cu in |
Tubing Length | 1.9m/6.23ft | Product Size | 61*9.5*15cm/24*3.74*5.9in |
Package Size | 78*22*19cm/30.71*8.66*7.48in | Gross Weight | 6.4kg/14.11lbs |
Product Tips


Notes
1.Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
2.Please note that the oil must be changed every six months.
3.Please loosen the venting screw when using it to avoid no pressure.

How to Use
1. Before use, please confirm whether the oil cylinder fits the quick coupling on the hydraulic pump. When using, stand on the back of the hydraulic pump and keep away from the hydraulic cylinder to avoid accidental injury.
2. When using, insert the quick connector on the high-pressure oil pipe of the oil pump into the oil cylinder connector first, and then lock the connector nut. Then, unscrew the tail ventilation screw, and tighten the return switch on the hydraulic pump head clockwise. Last, press the handle up and down.
3. Turn the oil return switch counterclockwise to release pressure. When not in use, tighten the ventilation screw at the rear to avoid hydraulic oil leakage.
Loading...
Loading...
Loading...
Loading...