Buying Guide of Stainless Utility Sink in 2023
by Kenny Sanay on Dec 07, 2022
Stainless steel is a perfect choice for a kitchen sink because it can be cleaned up quickly. The stainless utility sinks with thick gauges make minimal noise when you run water or prepare food. Also, this material is relatively lightweight as compared to other sink materials, highly corrosion-resistant, and hence it will not rust or corrode and not crack or chip, which renders it highly durable.
Table of Contents
What Size Should The Sink Is?
Start with the size of the sink currently installed. Measure the size of the sink for both the width and length, from edge to edge, and the depth of the basin. Take note of the location of the plumbing under the sink, specifically the kitchen sink drain placement.
If you do a lot of cooking, you should need larger space to wash large pots and pans, and a bigger sink with deeper basins will be helpful. It is extremely annoying trying to wash a large tray or dish in a sink that it just doesn’t fit into. However, a large sink costs more, and large one in a small countertop space would result in problems during installation and far from keeping a clean kitchen sink to maintenance you thought.
If you're not amaze at cook, you can probably get a standard size (about 22 to 33 inches long), but it's always better to go bigger than smaller if you have the countertop space to accommodate it.
What is the Best Grade of Stainless Steel?
A good quality stainless utility sink is made from 18/10 (also known as 304 grade) stainless steel, which means that the stainless steel is made from 18 per cent chromium and 10 per cent nickel.316 stainless steel is the best. 304 is the most common and the best value for money. 430 grade is high chromium stainless steel but lacks durability, flexibility and is not so resistant to denting. 201 stainless steel is lightweight, relatively low cost in restaurant equipment, appliances, but not ideal for using because it’s prone to pitting and crevice corrosion. The very lowest grade stainless steel has chromium levels between 10 and 12 percent and should be avoided at all costs.
What Things to Consider Before Purchasing a Sink?
If you're a little tougher on your kitchen sink, it might be smart to invest in a stainless steel sink. They look very minimal and modern and will be easier to keep clean. For industrial applications and kitchen equipment, grade 304 is the most versatile and is most notably present in industrial applications and kitchen equipment.
In the short term, the thickness of the steel isn’t significant. But if you’re looking for a sink that is durable and able to withstand heavy pots and pans being dropped on it as well as rougher wear and tear over time, then go for something a little more expensive and thicker.
No need to choose over 16- versus 18-gauge blindly, when you get up to 22-gauge the metal is more prone to denting and vibrating, and less able to handle a garbage disposer.
Six-inch-deep basins are cheap to make, but they splash and can't hold much. A 9- or 10-inch sink, on the other hand, holds lots—a big plus when countertop space is limited.
Single or Double Bowl?
Basin split needs a large amount of bench space to install 2 basins of equal size or one larger and one smaller basin.
If you have the space and the money, a double-bowl sink is necessary, because it provides the benefits of being better to house a waste disposal unit conveniently and being able to dual task.
Top list of stainless utility sink on sale
This Top-deal Stainless Utility Sink Table is made of sturdy 304 stainless steel, which is super easy to clean and keep hygienism. Its polished surface has better anti-corrosion effect and long-lasting using life! The spacious drainer provides you with enough space to dry everything from cutlery, plates to pots and pans. Such a free-standing sink is suitable for any dining environment. With double bowls, spacious drains and double storage shelves, it can ensure the efficiency of the kitchen.
Material: 304 stainless steel
Surface treatment: wire drawing technology
Number of bowls: 2
Bowl shape: rectangular
Maximum load: 150kg
Bowl size: 33x33x20cm
Platform size: 40x40cm
Overall size: 120x81x45cm
Inlet pipe: 80cm (31.5in)
Packing size: 125*50*35cm
The Large Square Stainless Utility Sink has stainless steel plate in acid and alkali resistant design, which is strong and durable with long service life. The board surface is made of 201 stainless steel,smooth and delicate, which is easy to clean. The internal arc angle design of the pool without any dead corner oil and any place to hide can make the sink easy to clean.The groove design on the surface of the pool can prevent the overflow of water.
Size: 500 * 500 * 800mm (19.7 * 19.7 * 31.5 inches)
Weight: 5.000 kg (11.02 lb)
Material: 201 stainless steel
Surface treatment: wire drawing and polishing
Groove depth; 250mm (9.8 in)
This RV Stainless Triangular Utility Sink is fired at high temperature from a skilled manufacturing process to ensure anti-rust, anti-corrosion and anti-scratch. And the classic triangular shape of the wall-mounted corner sink can be installed in any corner of the RV, even on the countertop or on the wall. It does not take up much space, so you can make full use of your extra space practically.
The 304 Stainless Steel bathroom sink use hydrophilic design, whose vessel and curved scalloped sink can direct water faster to the central drain, and avoid the collection of water when the bottom is flat.
Sink Material: 304 Stainless Steel
Overall Size: 30.5*30.5*13cm/12*12*5.1inch
Sink Size: 22.5*13cm/8.85*5.1 Inch
Wall Thickness: 1.2 Mm
Faucet Installation Hole Cut Size:36mm (1.42 Inch)
Water Drain Hole Cut Size: 41mm (1.61 Inch)
Water Drain Plug And Hose Are Supplied
You have to weigh the pros and cons here but the best stainless utility sink that fits your design needs. Considering these factors will help you make the right choice to select high-quality materials sink, and the one will offer a more sleek, contemporary, and elegant look to your kitchen.