Best Gold Detector Buying Guide in 2022

Best Gold Detector Buying Guide in 2022

by Terry Welch on February 13, 2022 Categories: CNCEST Blogs

Do you want to hunt for gold nuggets? If so,a gold detector that can handle tough ground conditions might be a good helper for you. However, there are so many gold detectors for sale in the market, which one could be the best for you? Go through and then you will get the answer.

Table of Cotents

Factors to Consider Before Buying

Hot-selling Gold Detector Machines

Factors to Consider Before Buying

1. Price

What buyer’s guide would be complete without one of the most important factors, that being the price of the detector? As we all know, there are thousands of detector machines at different prices on the market, along with various shapes, performance and functions. So, how to choose it? The best way for you is to figure out your real purpose to use it. If you are a newcomer in the world of gold detecting and  just want to dip your toe in the water to try out the hobby,an entry-level machine might be the best one for you to get into the hobby and become a real treasure hunter with minimal investment; while if you are an intermediate detector, high-end machines that are the cream of the crop might more suitable for you. These top detectors might cost a bit more, but the powerful performance and fantastic using experience you will get from them can more than pay for them.

2. Types of Detector

In general, gold detectors come in two flavors that feature either a Very Low Frequency (VLF) or a Pulse Induction (PI) operating system. VLF machines, which are very sensitive to gold in the soil, operate by sending a continuous wave into the ground and receiving any return signals from metal objects. PI machines whose main strength is in ignoring the toughest ground mineral conditions and finding both large and small gold nuggets at exceptional depth send singular pulses into the ground and receive any return signals from metal objects. Both machines operate differently, but they achieve the same goal of signaling metal that is in the ground. Compared to VLF machines, PI machines are more expensive and can locate gold that is buried deeper.What’s more, Pulse detectors are able to handle more challenging ground conditions with ease.

3. Operating Frequency

The frequency is the number of electronic waves that pass through a gold metal detector and into the ground when you are searching for gold nuggets.A higher frequency makes it easier to detect high conductivity metals such as gold. In addition, with the shorter wavelengths, higher frequency detectors can also locate small gold nuggets more easily than detectors with a lower frequency. However, a high frequency will not give you as much depth, which means you can not pick up the gold nuggets in deeper places, while a low frequency can achieve it. Try to learn more about the environment you are going to seek, find the gold distribution situation in the soil(big or not, deeper or not), and then choose the most suitable frequency for your detector machine.

4. Discrimination

An oft-overlooked aspect of determining which gold detector machine is right for you is comparing the various discrimination features offered by each machine. Most detector machines are sensitive both to gold and other minerals in the soil, which will waste lots of your time. And, with gold prospecting, time is money!

Further more, if you use the machine with a low level of discrimination, it’s highly possible that you can not discriminate gold out! Therefore, try to learn the detector you are going to buy more clearly and choose the one with a wonderful discrimination for gold, iron or other minerals.

Hot-selling Gold Detector Machines

No1. CNCEST Metal Detector-3D Professional Handheld

CNCEST Metal Detector-3D Professional Handheld

This product is an excellent metal detector for gold, which has a high sensitivity for gold and can distinguish many minerals to save your time during hunting. Using a micro-electric processor control chip unit calibration and instrument self-test system, this CNCEST Metal Detector-3D Professional Handheld can scan and detect quickly, improving the efficiency of hunting. With the 6 antennas, you can accurately determine the buried gold or other metals in 14 m. The key point is that it can not only be used for seeking gold, but also can be used for hunting silver, copper and gems. In general, this machine is a wonderful metal detector for both newcomers and professional hunters in gold seeking.

Q: How to Operate It Correctly?

1. Choose a comfortable position to stand on the ground, hold the instrument in your hand, and keep your elbows pressed firmly against your sides. NOTE: You must have the instrument in front of you, allow enough room for the receiving antenna to unfold, and tilt the antenna slightly downwards from horizontal(This angle is probably between 7 degrees and 10 degrees).

2. Hold the instrument as described above and scan in an arc very slowly. When the antenna is pointed at the target, the instrument locks on, although you continue to probe over the target. When you feel that the lock is effective, you remember this direction. Then, move the instrument to the left or right about 10 meters, and repeat the process of locking the target. Observe the locking direction this time. The intersection of the two directions is the buried position of the target.

No.2 CNCEST Sliver Handhold 3D Metal Detector

CNCEST Sliver Handhold 3D Metal Detector

If you want to select a long range gold detector, this CNCEST Sliver Handhold 3D Metal Detector whose search range is 800 m might exactly catch your taste. What’s more, this instrument perfectly combines field archaeology and scientific theory--Equipped with a high-quality remote search system and a precise positioning detection system, it can easily and quickly scan and detect, which greatly saves your time. Within 14 m, it can penetrate any container or obstacle to lock the treasures you are seeking. All of the features above makes it an advanced, practical and economical metal detection instrument.

Q: How to Maintain It?

1. Do not continuously charge for more than 24 hours. Please use 220V AC. NOTE: A new battery will only be effective if it has undergone two or three cycles of full charge and discharge.

2. Keep away from dust and dirt, which can cause corrosion and wear parts. Periodically wipe the detector with a damp cloth to keep it looking clean and new. Do not use harsh chemicals to clean the gold detector.

3. Please do not put the container containing water next to the charger to avoid overheating, leakage or failure of the charger due to water splashing.

4. Do not charge the instrument in these places: in direct sunlight; in places where the outside temperature is lower than 0 degrees or higher than 40 degrees; humid and dusty places; places with great vibration; near TV sets, etc.

Summary

There is a long way to go to select the right gold detector, but these factors above can help you filter out lots of machines, which do not fit you. Hope you dig a large amount of treasures!