
.jpg?x-oss-process=image/resize,m_fill,w_600,h_600)
.jpg?x-oss-process=image/resize,m_fill,w_600,h_600)
.jpg?x-oss-process=image/resize,m_fill,w_600,h_600)
.jpg?x-oss-process=image/resize,m_fill,w_600,h_600)
.jpg?x-oss-process=image/resize,m_fill,w_600,h_600)
.jpg?x-oss-process=image/resize,m_fill,w_600,h_600)
.jpg?x-oss-process=image/resize,m_fill,w_600,h_600)
AC220V DN50 2 Inch 2‑Way 3‑Wire Brass Electric Motorized Ball Valve ESA
- Brand: CNCEST
- Product Code: GY42SC-000100N2
- Availability: In Stock

Specifications
Color | Golden, White | Material | Brass |
Process | CNC Machining | Assembly Required | Yes |
Wiring | Zero Line (Two-color), Fire Line Close Valve ( Brown ), Fire Line Open Valve ( Blue ) | Voltage | AC 220V 50/60Hz |
Power | 6W | Port Size | DN50 2" |
Action Time | About 30s | Torsion | 8N.M |
Close Pressure Difference | ≤0.6MPa | Nominal Pressure | PN16 |
Angle | 0-90° | Applicable Medium | Cold/Hot Water, 50% Ethanol Solution |
Medium Temperature | 5-95℃/ 41-203℉ | Driver Size | 8.9*6.2*7cm/ 3.5*2.44*2.75in |
Valve Inner Diameter | 5.7cm/ 2.24in | Valve Outer Diameter | 6.9cm/ 2.72in |
Valve Length | 9.5cm/ 3.74in | Overall Height | 17.2cm/ 6.77in |
Gross Weight | 1.4kg/ 3.09 lbs | Net Weight | 1.2kg/ 2.65 lbs |
Package Size | 15*10.5*8 cm/ 5.91*4.13*3.15in |
Product Tips
.jpg)

Notes:
1.Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
2.Please note that this product is not suitable for car use, because the voltage in the car is not stable, and the product is not waterproof or shock-resistant.
3.The diameter of the valve will be reduced to a certain degree, please check the size before purchasing.
4.This product is not recommended for installation in an outdoor wet environment.
5.There is a delay of about 6-15 seconds between opening and closing, which is not suitable for frequent switching.
6.If the ambient temperature is below 32℉ and the product is not in use, the water in the pipeline must be drained off in advance to avoid the expansion of the valve cracking after freezing.
7.Please note that the pressure difference between the two sides of the valve should be less than 0.1 MPA when operating.
8.Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
Loading...
Loading...
Loading...
Loading...