Notes

1.When tightening the nut, do not use more than 44.091bs of force on the rocking bar handle. When you feel the rocking bar handle has a half-turn rebound, the nut is already tightened in place. Excessive force may damage the nut or the wrench. If a large force is used but cannot loosen the nut, attention should be paid to determining the left and right directions of the nut and whether the rocking bar direction has been reversed.
2.Please do not apply force after adding a lever to the rocking bar. When disassembling corroded nuts, you need to do rust removal treatment first. Please note that it is not suitable for small passenger cars.
3.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

How to Use

1. Select a suitable socket and assemble it on the square head on one side of the main body with a handle. Assemble the rocking bar handle on the square head on the other side of the main body.
2. Insert the assembled wrench socket onto the tire nut that needs to be disassembled or tightened.
3. Shake the rocking bar handle until the nut is loose and replace the main body with an extension bar before disassembly.
4. Tighten the nuts in the opposite order. First screw the extension bar into the nut, and then replace the extension bar with the main body tightening nut.